To change the network or IP address configuration follow the steps below:

  1. Click on Settings (Settings_Icon) at the bottom of the screen.
  2. Click on Network Settings from the menu on the left.
    xlplus_network_config_adapter1

    Network Configuration for Adapter 1

  3. Configure adapter 1 with the IP settings for your network.
  4. Adapter 2 can be left as 192.168.4.100 or changed to a scheme of your choice for the cameras.
    xlplus_network_config_adapter2

    Network Configuration for Adapter 2

The Network Adapters correspond to the labeled ports on the back. The location’s network should be Number 1 and the camera network should be on Number 2.