Watcher XL PLUS – Network Configuration

To change the network or IP address configuration follow the steps below:

  1. Click on Settings (Settings_Icon) at the bottom of the screen.
  2. Click on Network Settings from the menu on the left.
  3. Configure Network Adapter 1 with the IP settings for your network.
  4. Network Adapter 2 will be 192.168.4.250 or it can be changed to a scheme of your choice for the cameras.

The Network Adapters correspond to the labeled ports on the back. The location’s network should be Number 1 (labeled “1” or “Net”) and the camera network should be on Number 2 (labeled “2” or “Cams”).

Leave A Comment?

You must be logged in to post a comment.